|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| Raw Material: | Synthetic Rubber |
| Material: | Silicone Rubber |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Mould Silicone Material for Making Silicone Artificial Penis
Features:
This product is a kind of additive silica gel,colorless or skin colored flowing liquid.After vulcanization,it becomes a soft elastic
material.It has excellent electrical properties and chemical stability,water resistance,ozone resistance,non corrosiveness,
good air permeability,low linear shrinkage,non-toxic and tasteless.
Product Features:
·Not limited by product thickness, can be deeply cured;
·Low shrinkage rate, no low molecules are released during the crosslinking process, so the volume remains unchanged, and the shrinkage rate is less than 0.1%;
·Has excellent high temperature resistance, with temperatures reaching up to 200 degrees:
·Non toxic and odorless;
·Frequent mold flipping;
·Good fluidity and easy infusion: can be cured at room temperature or heated, easy to operate;
How to use:
1.Before mixing, first thoroughly stir the A component and B component in their respective containers until they are evenly mixed
2.When mixing, the weight ratio of component A to component B should be adhered to as 1:1.
3. Defoaming can be performed as needed during use. After mixing the A and B mixed solution evenly, it can be placed
Put it into a vacuum container, and after defoaming for 5 minutes at -0.08 MPa, it can be filled and used. No further steps are needed Vacuum machines can also operate without vacuum defoaming!
4. The temperature should be maintained above the temperature specified in the technical parameter table before and after curing, to ensure corresponding solidification
"Curing time, if the applied thickness is thicker, the curing time may exceed. At room temperature or with additional..."
Both heat curing and other methods are acceptable. The curing speed of the adhesive is affected by the curing temperature, and it takes a long time in winter
Time is required for curing. It is recommended to use heating method for curing, with a temperature range of 80~100C for 20 minutes
The clock generally needs to be cured for about 8 hours at room temperature.
The following substances may hinder the curing process of this product, or may cause uncured phenomena, so
After conducting a simple experimental verification, apply it. If necessary, clean the application site.
Incompletely cured condensation-type silicone, amine-cured epoxy resin, and white wax welding
Handling (so|der flux)
Storage and transportation:
·At room temperature of 25 ºC, without opening the packaging, for 12 months
·Mold silicone should be stored at room temperature, in a dry bath, and in a sealed container, and should not come into contact with water to prevent deterioration.
·This type of product belongs to non hazardous goods and can be transported as a general chemical.
If you need silicone rubber and silicone rubber products, as well as customized services, please contact me!
Human silicone is mainly used for high-grade silicone products such as human shaped organs,adult products,breast cushions, patches,anti-skid pads,silicone molds for simulating human face,and food grade molds.
Application:
1. For mold making / casting
2. For electronic potting / encapsulant
3. For making silicone rubber pads
4. For silicone rubber foam
5. For garment screen printing
6. For injection molding
7. For making silicone rubber
8. For life casting
9. For making silicone prosthesis
| Typical Properties Data | |||||
| Performance | Unit | MODEL NUMBER | |||
| Project | HL-R7005 | HL-R7010 | HL-R7012 | HL-R7020 | |
| Apearance | Transparent | Transparent | Transparent | Transparent | |
| Shore hardness | ShoreA | 5±2 | 10±2 | 12±2 | 20±2 |
| Tensile strength | MPa | ≥4 | ≥5 | ≥5 | ≥6 |
| Elongation at break | % | ≥400 | ≥500 | ≥520 | ≥520 |
| Tear strength | KN/m | ≥7 | ≥12 | ≥12 | ≥14 |
| Dynamic viscosity | mPa.s | 4000 | 6000 | 7000 | 8000 |
Guangdong Hailan New Material Technology Co., Ltd. was established in 2012 and is a professional manufacturer of special silicone rubber with organic silicon properties
Packaging
500g/plastic drum, 1kg/plastic drum, 4kg/plastic drum, 5kg/plastic drum, 20kg/plastic drum, 25kg/plastic drum, 200kg/metal drumShipping
Q: Are your silicone products produced in your own factory?
){kind=link}